Power Strip Holder
This is a cute little box that can hold a power strip
By the way I was forever_infinite_diys
By the way I was forever_infinite_diys
Materials
- a box cutter
- paint
- a shoe box
- cute fabric for designs
- power strip
- paint brush
- paint
- a shoe box
- cute fabric for designs
- power strip
- paint brush
Paint Your Shoe Box
This is really simple, get paint and paint it let it dry for a long time.
Cutting the Holes
Cut a hole for the cord, I used a square shape. Make sure that you can put the plug for it in
Cut a little flap on the bottom of the box near the hole were the cord will be for the power strip.
Next make plug holes, for each outlet. I made 6 it will look ok depending how you did on the holes, if the inside looks bad (like mine) just put the lid over it
Cut a little flap on the bottom of the box near the hole were the cord will be for the power strip.
Next make plug holes, for each outlet. I made 6 it will look ok depending how you did on the holes, if the inside looks bad (like mine) just put the lid over it
Last Thing
Paint the out side so that you can not see the cardboard area or "mess up" make sure it's 110% dry
Put on the fabric so it isn't just painted
Label your holes if you want to
YOUR DONE
Put on the fabric so it isn't just painted
Label your holes if you want to
YOUR DONE