Potato Peeler
![20240325_221241.jpg](/proxy/?url=https://content.instructables.com/F8F/NCG2/LU6YKD06/F8FNCG2LU6YKD06.jpg&filename=20240325_221241.jpg)
![Obieraczka do ziemniaków](/proxy/?url=https://content.instructables.com/F0V/B0BW/LUA42RU4/F0VB0BWLUA42RU4.jpg&filename=Obieraczka do ziemniaków)
Peeling potatoes is one of the most disliked chores i need to do at home. It takes a lot of time, especially when I peel small potatoes. I needed to make this process faster and easier.
Project is very, very simple, but it does the job.
Supplies
Bucket with lid
Sandpaper - I used 40 grit, but i think 80 grit is better
Hot glue
Threaded rod with 2 nuts and 2 pads
Bearing (inner diameter same size as threaded rod)
Drill
![zdj.png](/proxy/?url=https://content.instructables.com/FPC/W72A/LUA42QWU/FPCW72ALUA42QWU.png&filename=zdj.png)
Cut out a circle in the lid with a diameter slightly smaller than the bottom diameter of the bucket.
![20240325_220902.jpg](/proxy/?url=https://content.instructables.com/F3D/AN8U/LU6YKD0X/F3DAN8ULU6YKD0X.jpg&filename=20240325_220902.jpg)
Using hot glue, adhere sandpaper to the walls of the bucket and to the cut-out circle. Also, glue the bearing in the center of the bucket bottom.
I additionally secured the sandpaper to the disc using staples.
![20240325_221057.jpg](/proxy/?url=https://content.instructables.com/FO6/N6QK/LU6YKD0M/FO6N6QKLU6YKD0M.jpg&filename=20240325_221057.jpg)
![20240325_221048.jpg](/proxy/?url=https://content.instructables.com/FYM/Z8QY/LU6YKD0R/FYMZ8QYLU6YKD0R.jpg&filename=20240325_221048.jpg)
Tighten the cut sandpaper disc very securely onto the threaded rod.
![20240325_221115.jpg](/proxy/?url=https://content.instructables.com/FMG/0BK2/LU6YKD0G/FMG0BK2LU6YKD0G.jpg&filename=20240325_221115.jpg)
![20240325_221221.jpg](/proxy/?url=https://content.instructables.com/F4I/RSYS/LU6YKD0D/F4IRSYSLU6YKD0D.jpg&filename=20240325_221221.jpg)
And thats all. Pour some water into the bucket, add potatoes, attach the drill, and start peeling.