Portable Paracord Work Station

This is a portable work station for the growing craft of paracord. I have made numerous bracelets, collars, and other crafts all while working out of a central location. This box holds numerous colors of paracord, tools, and an assortment of buckles. I have worked with paracord for almost a year and a half and in that time I have made this box to help organize my materials. I quickly realized as i became more consumed by this craft that i would need a storage device to hold my equipment. This box has grown to this point and may grow larger in the future. I hope that you enjoy my tutorial and I also hope that it may influence you to try a new craft for yourself.  

Materials:
-PVC Pipe
-Paracord
-Gatorade Bottles
-Bags
-Tool Box

 There are no specifics to the tool box, I suggest one with small compartments to hold tools.

Tools:
-Power Drill
-1/4 Drill Bit
-Pencil
-Ruler
-PVC Pipe Cutters

There are multiple ways to store the paracord, I will show three examples. If you want to use different methods feel free to make your own choices or suggestions. All of the storage devices I use are cost effective, and recyclable. Not to mention you can quench your thirst with the Gatorade.

Storage Options:
-The PVC Pipe works well for 100'-50' of cord
-The bottles work well for 50'-25' of cord
-Plastic bags work well for 25' or less of cord

For the size of the box I use, I cut the pipe 6" long. To make the pipe accessible I drill three holes at 1/4", 3" and 5 & 3/4".
The next step I take is to pull the cord through the middle hole and tie a knot around the end, then pull
it tight and begin to wrap the cord around the pipe. When you have reached the end of the cord tie the end off at either end of the pipe through a hole on either end of the pipe.

**Note: I would be better to unravel the cord then to try and wrap with it bunched up.

If using a bottle, take the bottle lid and drill a hole through the center of it. Trim the edges of the hole so there are no sharp edges to snag the cord. Remove the lid and begin to feed the cord into the bottle. When you reach the end of the cord run it up through the lid and tie a knot on the end, that way you're able to pull the cord through the lid without all of it coming out at once. It is accessible and mess free.

I use ziplock bags to hold scraps or small amounts of cord. You just simply take the cord and put it into the bag.

The final step is to organize the box the way that suits you best.