Portable Modular Table - Made @TechShop!
by flowstyleliving in Workshop > Woodworking
1916 Views, 12 Favorites, 0 Comments
Portable Modular Table - Made @TechShop!
Table to sell my stuff in downtown SF.
(Reused Door Hinges)
Materials:
Wooden Board
Plywood
Door Hinges
Door Handle
Screws
Good Velcro
Tools:
Bandsaw/Mitersaw
File
Power Drill
Jigsaw
Angle Grinder
(Reused Door Hinges)
Materials:
Wooden Board
Plywood
Door Hinges
Door Handle
Screws
Good Velcro
Tools:
Bandsaw/Mitersaw
File
Power Drill
Jigsaw
Angle Grinder
Measure and Cut Your Materials
Gauge how tall you want your table to be.
Install Door Hinges
Center on Y axis and attach the door Hinges on either sides.
Install Legs
The screws came out of the 3/4" Plywood Board so I made spaces for them to slide through
(Later I decided to Angle Grind all the screws for them to be flush with their respective surfaces)
I used a 1/2" thick piece to level out the legs.
(Later I decided to Angle Grind all the screws for them to be flush with their respective surfaces)
I used a 1/2" thick piece to level out the legs.
Cut Your Feets!
Outline.
Clamp.
Jigsaw.
File.
whotf is Chad?
Clamp.
Jigsaw.
File.
whotf is Chad?
Test
Yeah!
Varnish and Create Handle Surface
I sanded down 3/4" thick pieces
Wood glued 2 of them together,
Let dry
Wood glued pieces between Main Board and Clamped,
Let dry overnight.
Wood glued 2 of them together,
Let dry
Wood glued pieces between Main Board and Clamped,
Let dry overnight.
Where Do the Feet Go?
Cut Velcro
Align
Set
Clamp
Align
Set
Clamp
Ta-Da!
Jyes.
Planning to install angled support hinges as time allows.
Thanks for stopping by! :D
http://www.techshop.ws/
Planning to install angled support hinges as time allows.
Thanks for stopping by! :D
http://www.techshop.ws/