Poppit Headdress
by Susan Cirigliano in Craft > Costumes & Cosplay
832 Views, 0 Favorites, 0 Comments
Poppit Headdress
![IMG_0222.PNG](/proxy/?url=https://content.instructables.com/FB6/394X/KV9J3USU/FB6394XKV9J3USU.png&filename=IMG_0222.PNG)
I made an Easy Poppit Costume and the more I thought about it, I kept feeling that I was missing something, I needed a prop, so I made a Poppit Headdress, hoping to enhance my Poppit Costume.
Supplies
![IMG_0210.jpg](/proxy/?url=https://content.instructables.com/FBD/WDJ1/KV9J3USN/FBDWDJ1KV9J3USN.jpg&filename=IMG_0210.jpg)
![IMG_0211.jpg](/proxy/?url=https://content.instructables.com/FIM/XCSD/KV9J3USO/FIMXCSDKV9J3USO.jpg&filename=IMG_0211.jpg)
It all started when I found an 8X10 square cardboard packing slip
Scissor
Heavy card stock strips
glue gun
ribbon
plastic condiment cups
Getting Started
![IMG_0212.jpg](/proxy/?url=https://content.instructables.com/FLB/JX1C/KV9J3USP/FLBJX1CKV9J3USP.jpg&filename=IMG_0212.jpg)
![IMG_0213.jpg](/proxy/?url=https://content.instructables.com/FIK/7NBD/KV9J3USQ/FIK7NBDKV9J3USQ.jpg&filename=IMG_0213.jpg)
First cut 2 strips of the cardstock 12" and 14". (measure for your own head)
glue the strips inside the cardboard shap
Next cut two pieces of ribbon to tie the headress .
* please note....when I finished my headpiece It slid around slightly on my head. I ended up gluing foam strips inside to help hold it snugly to my head. You may need to "pad" the inside of the piece as well. Or perhaps start with a smaller size outer shape.
Glue the Cups
![IMG_0214.jpg](/proxy/?url=https://content.instructables.com/FWP/7T2S/KV9J3USR/FWP7T2SKV9J3USR.jpg&filename=IMG_0214.jpg)
![IMG_0215.jpg](/proxy/?url=https://content.instructables.com/F88/PZ95/KV9J3USS/F88PZ95KV9J3USS.jpg&filename=IMG_0215.jpg)
I used a hot glue gun to glue the cups on all four sides of the piece. Finally spray paint the headdress.
Trick or Treat
![IMG_0221.PNG](/proxy/?url=https://content.instructables.com/FFU/NPA5/KV9J3UST/FFUNPA5KV9J3UST.png&filename=IMG_0221.PNG)