Polish Brass Article

Tarnish is a thin layer of corrosion that forms over brass as their outermost layer undergoes a chemical reaction.

To remove this tarnish (patina) there are couple of methods one of the easiest is to use special paste and buff it with smooth cloth

• Metal polish ( BRITE O in my case)
• clean rag
• tissue paper
• elbow grease !

• squeeze some paste on to cloth
• start buffing the metal in one direction only
• use new cloth for every piece because it tends to get dirty fast
• finish it by wiping it with a clean cloth or tissue (without paste)

Note:

Use soap solution or IPA to clean deep seated dirt.