Police Swat Tank.

I made a WW1 era tank, the mark 4 tank from the British army, but with a twist instead of using this tank in the army. This tank is used for law enforcement, the tank is used for riots and swat operations. The tank carried about six cannons.

The materials you need for this are.

1. Elmer's Glue and any bland of hot glue
2. Cardboard, thick cardboard is needed to make the tracks
3. Color pencils
4. Pencil for drawing the tank base
5. Markers
6. Paper for additional details
7. Ruler

Thats it.

Cut this shape to about 22 inches in length and 7 inches in height.

It should look like this.

Do this two times.

Cut a piece of cardboard that 3.5 in width and 1.2 in in height.

Cut this piece two pieces and

Cut a piece shape like this, 2.5 in for length and 1.5 in for height.

Do this for both sides.

Add a light broad on top of the tank, you need blue and red marker.

Add Police decals "SWAT" and "POLICE on the back and sides, front and the city if you're liking on the sides

Add lights on the sides and front and back.

Ram bar is needed in daily patrol, it used to stop fleeing cars and can be used to get though rough terrain.

First cut a thin piece of cardboard that 6 in in length and place it on the front of the tank

Cut a piece of cardboard to the shape on the second pic.

do this twice and wrap it and glue it on the front.