Pocket Hole Sealer

This project will guide you how to make a removable pocket hole sealer .

You can attach it when a hole occurs and you have no time to sew .

Here is a list of the tools you will require to make the project:

1. Sewing needle
2. Pen or pencil
3. Ruler
4. Scissor

Here is a list of the materials you will require to make the project:

1. Snap fasteners/ Buttons
2. A piece of Fabric
3. Thread
4. A cloth

Turn your cloth inside out,Take a piece of fabric and cut it in a way that it is similar to the pocket.

Again, Turn your cloth inside out, fold the piece of fabric in half and keep it above the pocket, cut the area from where you would insert your hand (refer image).

Sew the bottom and side of the pocket sealer, do not sew the area from where you would insert your hand (refer image).

Note : You can use any sewing method.

After sewing, insert the sealer into the pocket and mark the places on the sealer and the cloth where you would attach the snap buttons.

After marking the places, remove the sealer and attach the snap buttons.

After attaching the snap buttons, insert the sealer into the pocket and cut out any area that comes out.

You have made your own pocket hole sealer!!!!!!