Pneumatic Animatronic Lego Snake

by benthekahn in Living > LEGO & K'NEX

13991 Views, 13 Favorites, 0 Comments

Pneumatic Animatronic Lego Snake

DSC01256.JPG

I got bored...
For this instructable I needed two custom things to be made- this and this.

Materials

DSC01241.JPG

One...

  • Lego pneumatic air pump
  • Lego pneumatic valve
  • Optional-pneumatic air tank.

For each segment

  • Lego pneumatic tubing (about six inches)
  • Two lego pneumatic T junctions
  • One 15 hole lego technic beam
  • One pneumatic cylinder
  • One indescribable beam (see picture)
  • Three two unit long round pegs
  • Two round to cross pegs
  • One three unit long round peg

Assemble

DSC01243.JPG
DSC01245.JPG
DSC01246.JPG
DSC01247.JPG
DSC01253.JPG
Making the snake segments is simple. Just look at the pictures.

Assemble

DSC01251.JPG
You need to attach all the sections together. Once again, just look at the pictures.

Attach the Power

For this step, a picture is not needed.
1. Connect the air tank and/or pump to a valve.
2. Connect the outputs of the valve to the pistons.