Plywood Reading Lamp
![IMG_5541.JPG](/proxy/?url=https://content.instructables.com/FHS/157Y/IU8JJPS7/FHS157YIU8JJPS7.jpg&filename=IMG_5541.JPG)
![IMG_5555.JPEG](/proxy/?url=https://content.instructables.com/FLV/CA2U/IU8JJPSA/FLVCA2UIU8JJPSA.jpg&filename=IMG_5555.JPEG)
![IMG_5557.JPG](/proxy/?url=https://content.instructables.com/FCD/U7YG/IU8JJPSG/FCDU7YGIU8JJPSG.jpg&filename=IMG_5557.JPG)
![Zeplabs: Plywood Reading Lamp](/proxy/?url=https://content.instructables.com/F2V/XAGA/IU8JJPHK/F2VXAGAIU8JJPHK.jpg&filename=Zeplabs: Plywood Reading Lamp)
Even considered making a reading lamp out of a small piece of plywood? If not yet, do now!
Way too easy, and goodlooking enough. And with cleaner cuts than mine, it coul easily look even fancier....
But as I use to say, hand made is always fancy enough...
You 'll need:
-A piece of plywood apparently!
-A drill
-A lamp hat(i think you can find one in the closest dollar store)
-Some epoxy(otional)
-A cable along with a socket to plug it on the wall and a lamp!
It would be better though to use a lampholder instead of soldering the lamp as I did , temporarily i promise!
Ready??
Let's have a look at the video above!