Plywood Bowl

This is another in my series of test bowls that "I made it at TechShop". I have been working on things to use to build up a bowl. I hope you enjoy the process.

www.techshop.ws

So here are the parts to make the bowl. I did not measure these that are to be quick. But cut the plywood into squares.

Now you need to glue the parts up and let set for 24 hours. Make sure the plywood is all going the same direction at this step.

Now turn the bowl in the design you want and watch the layers of the ply to get a design you like. The sand and start to finish. I used wood dye to give the lighter ply a color. And then finish off with a good wax.