Playing Card Case
![Capture.PNG](/proxy/?url=https://content.instructables.com/F4Z/SCSY/LESJPW8P/F4ZSCSYLESJPW8P.png&filename=Capture.PNG)
![Capture.PNG](/proxy/?url=https://content.instructables.com/FZC/KXZM/LESJPWAB/FZCKXZMLESJPWAB.png&filename=Capture.PNG)
![Capture.PNG](/proxy/?url=https://content.instructables.com/F5O/7M5Y/LESJPWAJ/F5O7M5YLESJPWAJ.png&filename=Capture.PNG)
I made a playing card case
Supplies
![Capture.PNG](/proxy/?url=https://content.instructables.com/FFJ/MGZM/LESJPWAS/FFJMGZMLESJPWAS.png&filename=Capture.PNG)
![Capture.PNG](/proxy/?url=https://content.instructables.com/FAF/OPHN/LESJPWAZ/FAFOPHNLESJPWAZ.png&filename=Capture.PNG)
![Capture.PNG](/proxy/?url=https://content.instructables.com/F4L/AY33/LESJPWBC/F4LAY33LESJPWBC.png&filename=Capture.PNG)
All you need is:
-sketch
-extrude
-text
Sktech
![Capture step.PNG](/proxy/?url=https://content.instructables.com/FQ0/R5TZ/LESJPW9D/FQ0R5TZLESJPW9D.png&filename=Capture step.PNG)
Make a sketch of the average of your playing cards
Extrude
![Capture.PNG](/proxy/?url=https://content.instructables.com/F23/GGWX/LESJPWCJ/F23GGWXLESJPWCJ.png&filename=Capture.PNG)
Use the tool extrude to create the rectangle
Case
![Capture.PNG](/proxy/?url=https://content.instructables.com/FK9/7CTL/LESJPWEQ/FK97CTLLESJPWEQ.png&filename=Capture.PNG)
Create another sketch on top of the rectangle and leave a 5mm border. Then remove a smaller rectangle from the original rectangle