Pizza Cutter With a Spatula
by patelaashiv7994 in Workshop > 3D Design
49 Views, 0 Favorites, 0 Comments
Pizza Cutter With a Spatula
![PIZZACUTTER.png](/proxy/?url=https://content.instructables.com/FOX/D3ZV/LVMXFVGK/FOXD3ZVLVMXFVGK.png&filename=PIZZACUTTER.png)
We made a Pizza cutter with a spatula attached to it for efficiency in the kitchen.
Downloads
Supplies
![3d.png](/proxy/?url=https://content.instructables.com/F9L/U8GG/LVMXFVH6/F9LU8GGLVMXFVH6.png&filename=3d.png)
We used a 3D print for our model. We used hot glue to stick on the cutter to the bottom of the spatula
Cut
![cut.png](/proxy/?url=https://content.instructables.com/F1G/4CSL/LVMXFVK0/F1G4CSLLVMXFVK0.png&filename=cut.png)
Cut the pizza into slices using the cutter attached to the spatula
Pick Up
![spatula.png](/proxy/?url=https://content.instructables.com/FL5/ZGT6/LVMXFVM5/FL5ZGT6LVMXFVM5.png&filename=spatula.png)
Use the spatula shown in the picture and scoop up a slice of the pizza to put in your plate
Eat
![pizza .png](/proxy/?url=https://content.instructables.com/FC9/5VF7/LVMXFVON/FC95VF7LVMXFVON.png&filename=pizza .png)
after putting the pizza in your plate, eat the pizza