Pizza Cutter

I lost my favorite pizza cutter I had since college... I drew this up from memory!

No, it just isn't the same, but this works just as good.

Download and print the parts in the orientation shown.

Blade and Plug should be 50% infill. I like as high of a resolution as possible to help out with layer adhesion.

All files can be printed without support material!

For me, I used ABS for this part. You can use food safe material, but ABS seems to be working well.

Everything can be assembles without adhesive.

The plug should fit into the hole of the blade, and the housing will press-fit over the blade assembly and hold it all together.

This is made to be disassembled for cleaning. Depending on the plastic, it should be top-shelf dishwasher safe.

I've used ABS and have had no issues so far.