Pixelated Wooden Spoon Carving

In this instrucable and video, I will show you how I created this pixelated wooden spoon.

Tools I used:

Wood Glue- https://amzn.to/3gFJ0KZ

Clamps- https://amzn.to/34CWULe

hanging rotary tool- https://amzn.to/34CWULe

Planer- https://amzn.to/34CWULe

Belt & Disc Sander- https://amzn.to/34CWULe

My Camera- https://amzn.to/34CWULe

Camera Mic- https://amzn.to/34CWULe

I used Walnut and Poplar for this spoon. I love the contrast between the light poplar and the dark walnut. I would advise to chose similar color variances in the wood.

Make sure to rip BOTH wood species the same thickness. This will save you a lot of work in the next couple of steps. I cut two different thicknesses with both pieces of wood. 3/4" thick, and 1/2" thick.

To make sure I ripped all the pieces the same thickness, I planed each piece.Remember to make sure the thickness, and height is equal. If you do not have a planer you can use a hand plane, or good old fashion sanding.

Cut the pieces at 90 degrees in all different lengths. I went from about 1/2" up to 7" lengths. The more random you are the better!

This is the fun part! arrange the pieces however you like! Be sure to take into account the general shape of a spoon. Once you get the desired design, glue them up in different stages. NEVER glue them up all at once.

Plane (or sand) the surface yet again to make sure it is smooth for the next glue up.

Glue to two halves together. This is essential for doing if your lumber is not thick enough to accommodate the bend in the spoon. Both of my pieces glued together measure 1 3/4" thick.

Draw on a reference spoon shape to the top and side of the piece. I used a bandsaw to then cut out the general spoon shapes.

I used some chisels, a rasp and files to refine the shape of the spoon. This process takes time so be patient.

Sanding Sanding and more sanding! I refined the shape even more using 60 grit all the way to 220. Once I was pleased with the shape, I used mineral oil to finish the spoon.

You are finished!