Pipe Light
This is a very simple project to make creative and unique lights out of standard available hardware.
Step 1: Tools
All you need is:
1. Flat head screwdriver
2. Box cutter (or other way to strip wire)
Step 2: Supplies
What you'll need:
1. 3/8" pipe threaded both ends
2. 3/8" T-joint
3. 3/8" reducer from 3/8" to 1/8"
4. 3/8" pipe wall mount
5. Standard electric wire
6. Light bulb fixture
7. Light bulb
All of what I used was found and then up cycled but all of these can also be found at any local hardware store. Also feel free to get creative with the shapes. For some inspiration on other designs visit www.arcly.co.
Step 3: Assembly
Wiring notes:
AC power can be connected with either wire at each terminal to function but for safety follow the below:
Hot: black wire (from the skinny prong) connects to the screw that connects to the interior tip of socket
Neutral: white wire (from the wide prong) connects to the screw that connects to the threaded body of socket
AC power can be connected with either wire at each terminal to function but for safety follow the below:
Hot: black wire (from the skinny prong) connects to the screw that connects to the interior tip of socket
Neutral: white wire (from the wide prong) connects to the screw that connects to the threaded body of socket
Step 4: Get Creative
To get creative inspiration on new pipe configurations and designs go to: www.arcly.co/pipe-light/