Pikachu Layered 3D Christmas Ornament | Laser Cut, Pokemon, Christmas

This adorable DIY project transforms the iconic Pokémon character Pikachu into a festive Christmas ornament! Featuring Pikachu, it's made with five layers of laser-cut plywood. Each layer is painted individually for vibrant colors, then glued together for a stunning 3D effect. Perfect for Pokémon fans and laser cutting enthusiasts—hang it on your tree for instant holiday cheer!

Materials

1. 3mm plywood sheets (45*45CM)
2. Acrylic paints
3. Wood glue (clear-drying recommended)
4. Fine sandpaper (220 grit)

Tools

1. NEJE Laser cutter
2. Light-burn software
3. Paint brushes or sponges

Download this vector file (SVG) of a Christmas Pikachu divided into five layers

Recommended settings (adjust for your machine):

1. Cutting: 400mm/min, 100 % power
2. Engraving (fill): 15000mm/min, 80%power

Paint each layer separately before assembly for clean colors. Stack layers in order (back to front) and remember to pply wood glue sparingly between layers. At last, thread twine through the top hole for hanging.