Phone Charging Station
today, I will be showing how to do and easy DIY phone charging station.
Supplies
-2x4 piece of wood
-a pencil
- your phone and phone charger
Step 1: Cutting the Initial Piece of Wood
Firstly, you want to cut your 2x4 into a 9 inch piece of wood.
Step 2: Measuring Your Phone's and Charger's Size
Then, near the middle, you would want to measure your phone's size and draw around it. do the same for the charger, but inside the phone's shape model.
Step 3: Draw a Line in the Middle
next, you have to draw a line in the middle, to know where to make the hole after
Step 4: Drilling Holes
later, you would have to put the station in a drill press. first, you are going to drill halfway trough the line you draw. then, you will need to go all the way trough where you draw the charger line.
Step 5: Sand It
up next, you will have to sand the board everywhere around.
Step 6: Paint
the final step is not obliged to do, but you can paint the board in any color(i did paint it in stain), and then, let it dry.
and there you go, an easy DIY phone charging station. thank you, and have a good day