Smart Phone Charger Stand

Make a beautiful phone charger stand from left over wood.

Your need:
1 a router
2 a sander
3 jigsaw
4 a circular saw

I used 3/4 inch plywood. I suppose walnut or some other wood would have been better but once again I was working with what I had available. (can't remember how many times I've used that phrase.) But after I sanded, routered it and stained it it looked really good.

The base is 8 inches by 12. inches
The other part has the same dimensions.
Pencil where you want to cut. Make sure you measure exactly where the boards slid together. You want just a little play in there but not to much.

After you cut it out, sand it before you stain it. I routed it to make its overall appearance nicer and a more professional look.

I used a can of stain that was in my garage. I think it was called old American wood.

You can charge your phone, hang your watch and/or bracelet, and put your wallet, keys and other personal items on the back. If you wanted you could probably personalize it.

Good luck and God Bless!



Any questions, comments, complaints, advise? Please don't hesitate to let me know.