Phillips Bluetooth Speaker Transformation

With this Instructable, I will show you how to repair a Phillips BT2500, or any other Bluetooth speaker.

Mine wasn't working any-more because the micro USB de-soldered itself from the main board.

First thing, you need to remove all the screws from the speaker.

You can then unplug all the components:

- Main board (Amp + Bluetooth interface)

- Speaker

- Battery

- Potentiometer

You need to identify the problem at this moment.

Instead of soldering a new Micro USB to the board, I decided to pump it a bit, and change it's form factor.

I took a battery I got from an old asus tablet pc. I bought a micro USB 5V 1A battery charger ( https://www.amazon.fr/XCSOURCE-chargeur-batterie-... ).

I also got a power switch from and old ATX psu.

Finally I used a old philips radio that my dad use to have when he was young!
I used it's original speaker and potentiometer.

The bluetooth speaker was 8 Ohms and 3 Watts and I replaced it with a larger 8Ω 2W speaker.

The battery is also 3000 mA/h, way bigger than the previous 750 mA/h one.

Now, you just need to adjust the old radio. I cut some slots for the micro usb and switch with my dremel.

Soldered everything and testing it along the way.

It's now over you have a brand new "retro" looking bluetooth speaker!