Peugeot Car Keyshell Swap

by Ericbuilds in Workshop > Cars

514 Views, 0 Favorites, 0 Comments

Peugeot Car Keyshell Swap

IMG_20180408_181644922.jpg
IMG_20180408_181650389.jpg

Is your car key looking like this?

a small vice hammar and som cheep tools is all you need.

The Tools

IMG_20180408_181721942.jpg
IMG_20180418_205030400.jpg
IMG_20180418_205041807.jpg
IMG_20180418_205126288.jpg
IMG_20180418_205135473.jpg

Small screw driver to pry open the key

Hammar

Smal magnet to catch the lock that holds the key blade

Pliers

A small vice

Tape to hold the key in the right position

Driver tools

Disasembely

IMG_20180408_181743176.jpg
IMG_20180408_181828194.jpg
IMG_20180408_182728919.jpg
IMG_20180408_182038550.jpg
IMG_20180408_182252273.jpg
IMG_20180408_183052776.jpg

Pry open the key,

Take out the electronics (and put to the side)

Take out the key blade locking "spline"

Back Together Again

IMG_20180418_211141471.jpg

first move the blade

use the pliers to press the locking pin in place

put the electronics bak in the new key

and just press it together