Personalized Gifts With Laser Engraver, Vinil Cutter, and Electronics.

Those are the steps i done until finish this collage i made it from a carton cover from a shoes box this is one of much more i done. With to much pacience... for make the desings and put all inside of a shoes box... :D... Al lio.

Sorry about my English not to good but i try it.

I use to do it those machines. A chinese laser engraver ( Vevor ) with software ( InkScape, GIMP and K40 Wispered), a usplotter cutter from Vevor with software (Singcut), ·3D printer Anycubic X with the software (Cura, Scad and FreeCad). I use too some basic tools forthe hand made. Meter, cutter, electric saw for big cuts of wood and metraquilate, Dremmel 3000, clamps etc... And some materials like glue, brilliant foam paper, Fluorescense tape for little details wen ligth out can see letter and some contournes from collage. RGB strips, tiny mainboard for usb charger, Bateries US18650 sony Fukusima, and to much pacience... for make the desings and put all inside of a shoes box...

Take a Shoes Box cover and paint in black

Make all desings for the laser cut, plotter cut and 3D printer.

Take the measures and start to fit all desings and gue it all.

After all is glued and fix i start with electronic light installation.

Any cuestions just ask me and i will give you more detailed detais.Thank´s and See ya soon.