Upcycled Parts Pencil Cup

These ideas come only from people that like keeping the junk* from taking apart electronic devices...

How can you make a pencil cup from a drill motor? Keep reading to find out!

*Your mom's point of view

What You'll Need:

A drill motor

A Hot Glue Gun (You can use other adhesives such as: Silicone RTV, Epoxy, Sugru, And More)

A Drill

About one meter (~1 yard) of rope, string, or wire

A flat and hard piece of any material you want (I used a ferrite, If you don't have one, It's your time to improvise!)

A Screw

A sharp metal object (A Phillips Screw-Driver can work)

The pens or pencils you want in the cup

Choose a place where it will be comfortable for you to reach when you need a pencil,

I chose to place it under my Magnetic Pegboard.

After choosing the place, I marked a hole in the wood with a small Phillips Screwdriver.

Next, With my drill, I inserted the screw in the hole that I marked earlier

The motor is made out of two main parts (the Shaft and the Frame), I separated them by sliding them apart.

I hot-glued the ferrite to the bottom of the frame of the motor, This is to form a cup shape which won't let the pencils fall out through the bottom.

After that, I made a loop with magnet wire and hot glued it to the the motor's frame

Place it on the screw. Don't forget to put your preferred pens or pencils inside! ;)

I might change the way that it hangs in the future, But for now, It's good enough...

I hope you enjoyed my Instructable, If you wan't to see more projects like this, Don't forget to visit my Instructables page and subscribe for more future projects!

If you find a that I made a mistake please point it out so I can fix it!

I'd also really appreciate it if you vote for me in the contests I've entered :)

If you build a one that is similar to what I built, Please post a picture in the comments to show everyone!