Pen Pistol With Trigger

by MFPOSGBCS in Outside > Launchers

8706 Views, 3 Favorites, 0 Comments

Pen Pistol With Trigger

HaHa_100309_001.jpg
HaHa_100309_003.jpg
HaHa_100309_005.jpg
ok in a few months i'll be going on a class trip so i wanted to come up with a pen gun that is small, innovated, and good at short ranges because i'll be sitting in a bus fopr almost an hour and i want to shoot people in their backs without them knowing who it was.If you're going on a class trip and you wanna cause mischief then this is the gun for the job.

Materials

HaHa_100309_005.jpg
to make this you will need a peg with a nail in it, 3 pens, 5 rubberbands(4 thick and 1 thin), a yellow knex piece, tape, and scissors

Drill the Hole

HaHa_100309_003.jpg
HaHa_100309_006.jpg
use a drill or something really sharp to drill a hole in the pen. don't drill it to big or to small.

Drilling the Hole(cont.)

HaHa_100309_006.jpg
HaHa_100309_007.jpg
Now you take the other pen and drill a hole through it.

The Barrel/body

HaHa_100309_007.jpg
HaHa_100309_008.jpg
now tape both pens exactly as shownmake sure the holes meet each other.

The Trigger

HaHa_100309_008.jpg
HaHa_100309_009.jpg
now put the peg on with the nail inside the holes.next wrap it with the thin rubber band 4 times.

The Rubber Bands

HaHa_100309_009.jpg
HaHa_100309_010.jpg
HaHa_100309_010.jpg
Now cut 3 of the 4 thick rubber bands in half and tape them onto the barrel exactly as shown.

The Trigger: Part 2

HaHa_100309_010.jpg
HaHa_100309_011.jpg
Now take the last rubber band and wrap it around the trigger and tape it to the barrel.

The Grip

HaHa_100309_011.jpg
HaHa_100309_012.jpg
Now take the third pen and tape it to the end of the body of the gun.

Firing

HaHa_100309_012.jpg
Now for the fun part.put the knex piece at the end of the barrel, cock the rubber bands on the knex piece as shown.Put the pen cartridge in and pull the trigger and shoot.enjoy.