Particle Photon Alarm Clock

by aboush in Circuits > Microcontrollers

923 Views, 1 Favorites, 0 Comments

Particle Photon Alarm Clock

buildCode.PNG

You will need:

A particle photon
A small speaker
A button
A piece of cardboard
electrical wires
and a breadboard

Frame

Cut a piece of cardboard to the measurements shown above.

Tape it together like shown above.

Sync Photon

usbParticleGuide.PNG

Follow the guide to sync a particle photon to your account on this website:

https://docs.particle.io/guide/getting-started/connect/photon/

Wire Up the Electronics

Wire up the electronics as shown above

Code

buildCode.PNG

Create a new file in particle Build.

Take the code from this .txt file and put it in your particle build file.

Downloads

Set Up IFTT

ifTT2.PNG
IfTT1.PNG

Go to IFTT.com and setup an IFTT account.

Then, go to the top right corner and create a new applet.

You want to create an applet that links your calendar to the particle IO.

DONE!

Hook up the photon to power, set your google calendar so that your photon will receive the updates, and voila!