Part 5 of My Knot Series: the Highwaymans Hitch

by ThatKnottyguy in Outside > Knots

2784 Views, 25 Favorites, 0 Comments

Part 5 of My Knot Series: the Highwaymans Hitch

Instructables 118.jpg
The Highwayman's hitch is ideal for tying a rope to an object when you need a quick release. Just yank on the end that is not supporting the load to untie and completely remove the rope from the object it was tied to.
If you want to keep reading these, subscribe!



Materials

Instructables 111.jpg
  • Post, or similar thing to tie it to
  • Paracord 550, or rope

First Bite

Instructables 112.jpg
first, make a bite under the post with the short end on the right side.




bite- half loop.

Second Bite and Up

Instructables 113.jpg
Instructables 114.jpg
Instructables 115.jpg
make another bite with the left side of the rope and put it over the post and through the top bite. tighten.

Right Bite

make a bite with the right side, and put it through the top bight.
Then pull the shorter rope to untie it when needed. Tie to horse or other thing with longer end.
Hope you liked it! If you have any problems, ask me in the comments!
Until next time, -TKG