Paracord Bracelet
Simple paracord bracelet
Materials
Clip and 15 feet of paracord
Prepare Ends
Use a lighter to burn the ends. This will prevent fraying.
Weave the Runs Between Clips
Leave a small end out . Running the cord back and forth between the clips. This gave me 7 lines on the front/top and 6 on the back/bottom. Keeping them all even. I measured 10 inches from clip end to clip end for the length.
Start Weave Down the Runs.
Weave over under and back n forth.. Then tighten & repeat until you've done this throughout the entire thing.
Back Weave
Back weave the same way you weaved through. This will help square up the weave pattern. Cut off excess cord and burn ends. Tuck ends into weave. You're done!