Paracord Zipper Pull
by Captain MacTavish in Outside > Paracord
1280 Views, 21 Favorites, 0 Comments
Paracord Zipper Pull
![P1020228.JPG](/proxy/?url=https://content.instructables.com/F0H/K5S9/I4CNDJM1/F0HK5S9I4CNDJM1.jpg&filename=P1020228.JPG)
Yes, unfortunately you probably have seen many of these, but most of them are either too long, not used the right braid (there are different ones for a reason). To get to the point, this is the one you could use.
Get Your Stuff
![P1020211.JPG](/proxy/?url=https://content.instructables.com/F5X/58II/I4CNDJ89/F5X58III4CNDJ89.jpg&filename=P1020211.JPG)
I have a "SOG" Barrage backpack with a broken zipper pull that I miss dearly :)
Construction
![P1020212.JPG](/proxy/?url=https://content.instructables.com/FEJ/BDRD/I4CNDJ8Q/FEJBDRDI4CNDJ8Q.jpg&filename=P1020212.JPG)
![P1020215.JPG](/proxy/?url=https://content.instructables.com/FHO/TNCL/I4CNDJ8R/FHOTNCLI4CNDJ8R.jpg&filename=P1020215.JPG)
![P1020217.JPG](/proxy/?url=https://content.instructables.com/FPS/AJCX/I4CNDJAW/FPSAJCXI4CNDJAW.jpg&filename=P1020217.JPG)
![P1020219.JPG](/proxy/?url=https://content.instructables.com/F30/XMXZ/I4CNDJAY/F30XMXZI4CNDJAY.jpg&filename=P1020219.JPG)
![P1020220.JPG](/proxy/?url=https://content.instructables.com/FQS/9IE1/I4CNDJAZ/FQS9IE1I4CNDJAZ.jpg&filename=P1020220.JPG)
![P1020222.JPG](/proxy/?url=https://content.instructables.com/F5O/L7RA/I4CNDJD5/F5OL7RAI4CNDJD5.jpg&filename=P1020222.JPG)
Singe the end to a point so you can fit it thru the hole. Pull the ends at halfway and start braiding the "Cobra". Once that is done snip the extra and singe the ends with your lighter.
The End
![P1020228.JPG](/proxy/?url=https://content.instructables.com/FZT/ZCEM/I4CNDM34/FZTZCEMI4CNDM34.jpg&filename=P1020228.JPG)
Now you have a fully functional zipper pull!!!