Paracord Pouch for Mini Multi-Tools Leatherman PS4 or Gerber Dime
by meqnine in Outside > Paracord
71628 Views, 679 Favorites, 0 Comments
Paracord Pouch for Mini Multi-Tools Leatherman PS4 or Gerber Dime
A man needs to protect his tool
Make a Cobra Weave Bat
The same way you make a paracord bracelet, you make a cobra weave bar.
The cobra weave bar will be used as main structure for the pouch.
Length
Make sure the cobra weave bar is long enough to wrap it around the tool perimiter, minus one side to be left open as the pouch mouth.
Side Walls
With a paracord lacing needle, weave to side of the pouch, in and out as shown om the picture.
Side Walls
Keep weaving from the mouth of the pouch, to the bottom, then cross to the other side and proceede weaving from bottom to top.
Adjusting
keep going...
Fitting
place the tool inside the pouch, adjust the side weaving by loosening or tightening as needed to assure a smooth fit.
Finishing
Tie the ends of the side weaving, trim any excess and use a lighter to melt the ends.
Et Voila!
surprisingly, it also fits the Gerber Dime Multi tool