Paper Toy - Hovercraft / Ekranoplan
by DIY-HOVERCRAFT in Craft > Paper
809 Views, 4 Favorites, 0 Comments
Paper Toy - Hovercraft / Ekranoplan
![ptit.jpg](/proxy/?url=https://content.instructables.com/FCN/LJ8R/KZZKJJZZ/FCNLJ8RKZZKJJZZ.jpg&filename=ptit.jpg)
This is a paper toy that uses ground effect to rise above the ground and move forward.
By blowing at its back, you replicate the lift and propulsion that occurs on a hovercraft or an ekranoplan.
This little toy is far from perfect and could certainly be improved ! Feel free to give me your feedback :-)
Please note that this paper toy is under the CC BY-NC-ND 4.0 licence.
Supplies
A printer and a paper sheet, and that's it. You can use standard paper sheets (80g / m²) but you will get better results with thickier paper sheets.
For better performances, you can use tape to completely seal the joint between the two paper parts.
![test2.jpg](/proxy/?url=https://content.instructables.com/F9B/M3UW/KZZKJK00/F9BM3UWKZZKJK00.jpg&filename=test2.jpg)
Enlarge the image by right-clicking on it and select "open in a new tab" or "display image". You can then save it on your device to print it.