Paper Tower Storage

by JR07 in Craft > Paper

504 Views, 3 Favorites, 0 Comments

Paper Tower Storage

42F36FE0-24E5-4350-B1BE-F65034332E69.jpeg
835740D3-52D1-4AC4-AA17-557D716CB2BF.jpeg

This tower can be used for a verity of thing it can be a small storage for little item’s shuck as beads or earrings. The use of it is up to you to decide anyway let’s start.

Supplies

You Will Need:

  • 3 A4 Sheets of paper
  • A Ruler
  • Scissors
  • Pen or Pencil
  • Sticky tape

Making the Tower

21BB72C2-48AE-47DB-84D0-ADB57389B413.jpeg
733D2050-1EEC-4C79-85C2-C33647AF53CE.jpeg
A92754EC-3DB2-47E1-A3A3-5648670092C7.jpeg
9AE00504-7774-4657-9FE0-C7B6F5C0E383.jpeg
9B450C00-6EBF-4F95-B568-656D57C80FF3.jpeg
DF371BD0-69C0-40BB-8FFB-A9AEEE9792E8.jpeg

This part is quick and easy. Simply fold an A4 sheet of paper in half then again and then again unfold it. It should then look like the first image above. Then you must fold it back and forth using a mountain fold then a valley fold and so on along those the creases so it looks like image 4 above. Then fold it alternating between 90degree and 180degree folds. It should now look a bit like image 5. Tape the at the top and bottom of each of the edges where the 2 layers of paper meet.

Make the Levels

CD9CCC62-1E84-4BA8-AC50-08CC6891FD9C.jpeg

All you need to do here is copy from the image above each edge is 10cm and the dotted lines are one cm in from the out side. Dotted lines mean fold and solid lines mean cut. Fold the edges up so that it looks like a Shallow tray then tape the edges. Finally solid on the tray onto the tower. Repeat this five times and your done if you want you can create a outside to co