Paper Propeller
![IMG_20210302_094623_261.jpg](/proxy/?url=https://content.instructables.com/FE6/CVDB/KLQLFH16/FE6CVDBKLQLFH16.jpg&filename=IMG_20210302_094623_261.jpg)
This instructable is on how to make a paper propeller which is normally rotated by wind or air pressure.
Supplies
1. Paper
2. Broom stick
3. Razor blade
4. Plastic bottle
Fold the Paper
![IMG_20210302_094043_377.jpg](/proxy/?url=https://content.instructables.com/FXT/9X0S/KLQLFETX/FXT9X0SKLQLFETX.jpg&filename=IMG_20210302_094043_377.jpg)
Fold the end of the paper twice as shown above
Cut Your Paper
![IMG_20210302_094222_375.jpg](/proxy/?url=https://content.instructables.com/FZD/TD7O/KLQLFF3A/FZDTD7OKLQLFF3A.jpg&filename=IMG_20210302_094222_375.jpg)
Cut your paper from the top, ending it at were the paper is folded
Make a Hole
![IMG_20210302_094623_261.jpg](/proxy/?url=https://content.instructables.com/F9V/WQ6O/KLQLFFGY/F9VWQ6OKLQLFFGY.jpg&filename=IMG_20210302_094623_261.jpg)
Mark three points within the folded region as shown in the picture above and drill small holes at the marked locations.
Insert Broom Stick
![IMG_20210302_094815_902.jpg](/proxy/?url=https://content.instructables.com/FJN/ZZ82/KLQLFFL7/FJNZZ82KLQLFFL7.jpg&filename=IMG_20210302_094815_902.jpg)
Insert broom stick to pass through the drill holes as shown above
Final Assembly
![IMG_20210302_101250_382.jpg](/proxy/?url=https://content.instructables.com/FB4/FH8I/KLQLFFW7/FB4FH8IKLQLFFW7.jpg&filename=IMG_20210302_101250_382.jpg)
Insert a small broom stick to pass through the middle hole and connect it to a plastic container
Finally. Here We Go!
![VID-20210302-101128-min.gif](/proxy/?url=https://content.instructables.com/FXM/P9IO/KLQLFHEX/FXMP9IOKLQLFHEX.gif&filename=VID-20210302-101128-min.gif)