Paper Oloid
![IMG-20210319-WA0016.jpg](/proxy/?url=https://content.instructables.com/FVD/ZL9H/KMM11M5O/FVDZL9HKMM11M5O.jpg&filename=IMG-20210319-WA0016.jpg)
![Oloid](/proxy/?url=https://content.instructables.com/FW2/IRVN/KMP5CXKX/FW2IRVNKMP5CXKX.jpg&filename=Oloid)
My 10 year old wants to make an instructable. Funny that he selected an oloid to make his first instructable. He taught himself from some online forum. So here it goes.
Design
![IMG-20210319-WA0010.jpg](/proxy/?url=https://content.instructables.com/FUX/ID4X/KMM11M5I/FUXID4XKMM11M5I.jpg&filename=IMG-20210319-WA0010.jpg)
We need 2x 2 inch diameter circles with radius cut till half.
Make
![IMG-20210319-WA0011.jpg](/proxy/?url=https://content.instructables.com/FZL/HBEI/KMM11M5J/FZLHBEIKMM11M5J.jpg&filename=IMG-20210319-WA0011.jpg)
![IMG-20210319-WA0017.jpg](/proxy/?url=https://content.instructables.com/FBD/TA3D/KMM11M5P/FBDTA3DKMM11M5P.jpg&filename=IMG-20210319-WA0017.jpg)
![IMG-20210319-WA0009.jpg](/proxy/?url=https://content.instructables.com/FJ8/7SNR/KMM11M5H/FJ87SNRKMM11M5H.jpg&filename=IMG-20210319-WA0009.jpg)
Take a card stock paper. Draw 2 circles of 2 inch diameter. Use a compass as we need to mark the centers.
Mark
![IMG-20210319-WA0014.jpg](/proxy/?url=https://content.instructables.com/FKA/03ZU/KMM11M5M/FKA03ZUKMM11M5M.jpg&filename=IMG-20210319-WA0014.jpg)
![IMG-20210319-WA0012.jpg](/proxy/?url=https://content.instructables.com/FVR/OX7A/KMM11M5K/FVROX7AKMM11M5K.jpg&filename=IMG-20210319-WA0012.jpg)
![IMG-20210319-WA0013.jpg](/proxy/?url=https://content.instructables.com/F8T/T6HM/KMM11M5L/F8TT6HMKMM11M5L.jpg&filename=IMG-20210319-WA0013.jpg)
![IMG-20210319-WA0015.jpg](/proxy/?url=https://content.instructables.com/F2L/764T/KMM11M5N/F2L764TKMM11M5N.jpg&filename=IMG-20210319-WA0015.jpg)
Mark the center. Draw the radius on both the circles. Now cut out the circles with scissor or cutter. With a scale mark the center of the radius.
Downloads
Cutting and Slotting
![IMG-20210319-WA0020.jpg](/proxy/?url=https://content.instructables.com/F31/E8JR/KMM11M5S/F31E8JRKMM11M5S.jpg&filename=IMG-20210319-WA0020.jpg)
![IMG-20210319-WA0018.jpg](/proxy/?url=https://content.instructables.com/FJW/A015/KMM11M5Q/FJWA015KMM11M5Q.jpg&filename=IMG-20210319-WA0018.jpg)
Cut the radius till the half mark. Now you can slot the 2 circles at 90 degrees to each other.
Done
![Oloid](/proxy/?url=https://content.instructables.com/FBM/U6B9/KMP5CXLD/FBMU6B9KMP5CXLD.jpg&filename=Oloid)
Your oloid is ready. Roll it and see it wobble downhill. Have fun