Paper Lotus Flower

by Darja Dodu in Craft > Paper

2339 Views, 43 Favorites, 0 Comments

Paper Lotus Flower

MyCollages(1).jpg

Good afternoon, dear viewers and readers! In today's instruction, I will show you how to make a DIY paper lotus flower.

Supplies

IMG_20220223_141427_1.png
IMG_20220223_141516.jpg

To create a lotus flower out of paper, we need:

  • Coloured paper.

Essential Equipment:

  • Scissors.
  • Ruler.
  • Pencil.
  • PVA glue stick.


Cutting Paper Into Pieces

IMG_20220223_142916.jpg
IMG_20220223_144130.jpg
IMG_20220223_151022.jpg

First you need to mark the paper with a ruler and a pencil. From a sheet of A4 paper, we need to get 6 squares with dimensions of 9 cm by 9 cm, we will need the remaining strips after cutting out to complete the formation of a lotus flower.

In total, we need 8 pink squares and 8 green squares.

Fold the Sheet in Half

IMG_20220223_151158.jpg
IMG_20220223_151239.jpg
IMG_20220223_151309.jpg
IMG_20220223_151327.jpg
IMG_20220223_151407.jpg

Next, proceed to the formation of a lotus flower. Take a square piece of paper and fold it in half. Then fold the sides in half again.

Corner Bending

IMG_20220223_151452.jpg
IMG_20220223_151535.jpg
IMG_20220223_151650.jpg
IMG_20220223_151702.jpg
IMG_20220223_151753.jpg
IMG_20220223_151809.jpg
IMG_20220223_151845.jpg
IMG_20220223_151918.jpg
IMG_20220223_151942.jpg

Then we spread the sheet of paper so that we get a rectangle. After we begin to bend the corners in the form of triangles, first on the side where there is a solid fold.

Then we need to fold the corners on the side where there is no solid paper seam. Next, we bend this part of the paper and turn the blank over to the other side and bend the corners. We should get a blank in the form of a boat.


Petal Formation

IMG_20220223_152016.jpg
IMG_20220223_152105.jpg
IMG_20220223_152119.jpg
IMG_20220223_152136.jpg
IMG_20220223_155556.jpg

Then the sides of the resulting shape need to be moved apart and one edge bent inward. In this way we get a flower petal.

Flower Formation

IMG_20220223_155802.jpg
IMG_20220223_155815.jpg
IMG_20220223_155858.jpg
IMG_20220223_155938.jpg
IMG_20220223_160923.jpg
IMG_20220223_160937.jpg
IMG_20220223_160944.jpg

Next, we need to insert the resulting petals into each other. Previously, the sides of the petals must be greased with glue stick for better retention.

Preparing the Bottom

IMG_20220223_165955.jpg
IMG_20220223_170048.jpg
IMG_20220223_170131.jpg
IMG_20220223_170204.jpg
IMG_20220223_170233.jpg

Next, on the green square, you need to step back 3 cm from the side and make a mark. Then we need to bend the sides so that we get three identical folds.

Folding Corners at the Bottom

IMG_20220223_170318.jpg
IMG_20220223_170330.jpg
IMG_20220223_170420.jpg
IMG_20220223_170434.jpg
IMG_20220223_170537.jpg
IMG_20220223_170601.jpg
IMG_20220223_170633.jpg
IMG_20220223_170658.jpg
IMG_20220223_170716.jpg
IMG_20220223_170749.jpg
IMG_20220223_170806.jpg
IMG_20220223_170829.jpg
IMG_20220223_170843.jpg
IMG_20220223_170853.jpg

Then on each side you need to bend the edges to the middle. Then all once again you need to bend exactly in the middle.

Then we need to fold the corners on the side where there is no solid paper seam. Next, we bend the other part of the paper and turn the blank over to the other side and bend the corners again. We should get a blank in the form of a boat as described before.

Bottom Formation

IMG_20220223_170904.jpg
IMG_20220223_170921.jpg
IMG_20220223_171017.jpg
IMG_20220223_171038.jpg
IMG_20220223_171110.jpg

Next, the resulting parts must be inserted into each other and glued as in the first case.

Preparation of a Long Strip

IMG_20220223_171646.jpg
IMG_20220223_172025.jpg
IMG_20220223_172042.jpg
IMG_20220223_172047.jpg

Next, prepare the middle part. We will use the remaining strips 3 cm wide and about 60 cm long. On the blanks along the length, you need to make many small cuts in the form of small strips. Then everything needs to be twisted into a tube and glued on the edges.

Gluing Parts

IMG_20220223_171541.jpg
IMG_20220223_171603.jpg
IMG_20220223_173008.jpg

Then we begin to glue all the details together. Glue the lotus flower to the bottom first. Then we glue the part in the form of a fleecy tube in the middle of the flower.

Finished Result

IMG_20220223_173429.jpg
IMG_20220223_173438.jpg
IMG_20220223_173501.jpg
IMG_20220223_173600.jpg
IMG_20220223_173701.jpg
IMG_20220223_173717.jpg
IMG_20220223_173721.jpg

Then you can enjoy the finished result. This paper lotus flower will delight you and your loved ones!

Thank you all for watching and reading the article. Don’t forget to like it and subscribe!