Paper Helicopter

easy to make paper helicopter

you need a lined piece of paper, a paper clip, and scissors. this helicopter does not have to be cut perfectly straight.

cut a third of the paper off, the third cut of should be the one with the holes.

cut a slit a third of the way down the top around the middle.

then cut the side a third of the way in, four lines down from your first cut.

then follow step four on the opposite side.

fold the bottom flaps in to make a handle

fold the very botom up then paperclip it, the wieght helps it fall straight.

fold the top flap straight down towards you

flip it over and follow step 8

cut about an inch off both sides, the thinner they are the faster they spin

follow step ten for the other rotor.