Paper Fantasy Wolf Sculpture

I love wolves. I have wanted to make a sculpture of one for a while now.

Here's how i made a fantasy wolf sculpture with cardboard and paper mache and just regular paper. Enjoy :P

You Will Need:

• Cardboard for the frame
• PVA glue for the paper mache
• Glue stick
• Printer paper
• White paint
• Masking Tape

I made a cardboard frame to make the whole sculpture more sturdy. I used a reference photo to get the rough shape of the body. But it doesn't need to be too accurate.

I used newspaper and masking tape to bulk out the body of the wolf to the right proportions. I then rolled up some newspaper and masking tape to make the legs and stuck them on the body.

Then using a simple mix of 2/3 pva glue and 1/3 water i paper mached the entire wolf adding half cones fore the ears.

I then painted the entire sculpture in white paint so that the newspaper could not be seen.

To simulate fur i cut out lots of little tear drop shapes. I did this by folding a piece of paper multiple times so i could get a couple with each cut. This took a long time and i would recommend cutting more out as you go and working in sections and take lots of breaks.

For this i used the glue stick. I started at the back and layer on as i went. You want to start from the bottom and work your way around to make sure that the fur looks right.

For the legs i did a similar thing but i cut out some smaller pieces of paper. I then went around with lots of paper finishing the sculpture. Taking my time and looking at my reference photo.