Paper Cargo Plane

This instructable will show you how to make a paper cargo plane. I hope you like it!

You will need:

You will need your cover stock for this step

First you fold the left side over to and even with the right side then you unfold the paper

Next fold the top left corner down and repeat on the right side

Now fold the left side down to the center and repeat with the right side next you fold the left side over to and even with the right side

next measure exactly 3 cm from the left side at the bottom and now take the top wing and fold it to the left folding along the line.

now measure exactly 1 cm from the bottom left and fold your wing tip to the right

Now repeat the last 2 steps but going in the opposite directions on the other side and the plane is done(Minus the cargo space)

Now for the cargo space draw out on another piece of cover stock the diagram above and use the paper cutter to cut out the outside of the diagram so that it looks like the picture above

now fold along all the connecting line between the sqaures

now to end the cargo space just tape the the cargo space into a box shape

you could put Legos in the box if you wish.

take some more tape and tape the cargo space to the bottom of the plane(or experiment with some other place) and it is done.

I hope you liked this instructable and that this was helpful!