Paper Airplane Glider From Grampa D

I have very fond memories of my "Grampa D" from when I was little. He taught me how to make the World's Best Paper Airplane and today I can share it with you. This paper airplane design has been enjoyed and played with for 3 generations. The front is blunt so it can take a crash and keep going. It is simple, unique, and glides pretty well. (Usually better than in the video) All you need is a regular size sheet of paper, I used printer paper, and scissors.

You have the choice to watch the instructional video, read the step-by-step instructions, and/or view the step-by-step pictures.
Enjoy :-)

For more videos like these and other DIY projects, click here.

• Fold one corner down along the other edge so you have a 90 degree angle
• Then fold the bottom part up and crease it.
• Unfold them all and cut off the rectangle on the bottom along the crease you made so now you have a square and a rectangle.

• Your square should have a crease from one corner to the opposite. Now fold one creased corner to the other and open it back up.
• You now have an "X" crease in your paper. Flip it over and fold one side to the opposite side and open it back up.
• You should now be able to make the triangle like in the picture.

• Your triangle has flaps on the sides. Take the top flap on each side and fold it up to the point.
• Then with the same flaps, fold the lower edge along the center of the larger triangle.

• Take the long rectangle you cut off and fold it lengthwise.
• Look in the picture to see the line you are to cut. This makes the tail flaps.
• Open it and fold the other end to a point. It should look like an arrow.
• Then insert the tail in the triangle all the way to the end and keep it centered.

• Now making sure the tail is centered, cut from the front point of the plane down to the flap. (it's about an inch and a half)
• The top smaller flaps can be opened to make pockets that the part you just cut can slid into.
• Insert both tips into the pockets by folding them over.
• Fold down the tail flaps to make tail wings
• Now gently fold the whole plane in half

• You hold it by pinching it near the front and giving it a toss.