Paper Aeroplane Slingshot.

This is a step by step guide on how to make a paper aeroplane and/or a paper aeroplane slingshot.
If the instructions are followed the slingshot will work and the plane will fly smoothly.

What you need:
A4 paper (any size actually, but a4 is best).
Scissors
Elastic band
Your hands.

Why not have a look at my other instructables:
https://www.instructables.com/id/Knex-Mini-Transformer-Jet/          Knex Transformer Jet
https://www.instructables.com/id/Knex-mini-transformer-tank/          Knex Transformer Tank
https://www.instructables.com/id/Knex-mech-warriorrobot/              Knex Mech Warrior/Robot
https://www.instructables.com/id/Knex-mini-motor-bikefinger-bike/   Knex Mini Motor Bike/ Finger Bike


Hope you like it.

Here are  the steps:

1. Fold the paper in half, horizontaly

2. fold in the top corners, to create a point at the top

3.Fold the side in of the plane in again, ths makes it thinner and more like a jet

4. Fold together the paper, this is what it looks like now

5. Fold down one side of the plane to create a wing, fold it down so the wing is the depth of the plane

6. Exactly the same as step 5, but opposite side

7. This is what it should look like now

8. Now with your scissors cut out the square, as shown in the pic.

9. cut out the tail, with the scissors

DONE

This will tell you how to fire the plane.

If this does not work, then you can just use it as a plane.

Sorry pictures are blury.