Paper 3d Labyrinth Puzzle
![main.jpg](/proxy/?url=https://content.instructables.com/FMB/K600/K8CFZMVB/FMBK600K8CFZMVB.jpg&filename=main.jpg)
![Puzzle box 2](/proxy/?url=https://content.instructables.com/FG7/4SP1/K8CFZN2P/FG74SP1K8CFZN2P.jpg&filename=Puzzle box 2)
I was always fascinated with those cube labyrinth puzzles. Always wanted to make one. But considering my skills, I can not go much beyond paper and its uses. So came up with this plan to make one.
Design
![01.jpg](/proxy/?url=https://content.instructables.com/F8U/JXVE/K8CFZMTT/F8UJXVEK8CFZMTT.jpg&filename=01.jpg)
I planned of making a 6cmx6cmx6cm with a 3 layer labyrinth. So here is my drawing. This is a pretty simple design considering I am making it the first time.
Cuts
![02.jpg](/proxy/?url=https://content.instructables.com/FCQ/SEPZ/K8CFZMTU/FCQSEPZK8CFZMTU.jpg&filename=02.jpg)
![03.jpg](/proxy/?url=https://content.instructables.com/F3W/57UF/K8CFZMTX/F3W57UFK8CFZMTX.jpg&filename=03.jpg)
![04.jpg](/proxy/?url=https://content.instructables.com/F45/7GL2/K8CFZMTY/F457GL2K8CFZMTY.jpg&filename=04.jpg)
![05.jpg](/proxy/?url=https://content.instructables.com/FY8/M4BG/K8CFZMTZ/FY8M4BGK8CFZMTZ.jpg&filename=05.jpg)
I cut out 4 6cmx6cm card stock. Also cut out some 2cm wide strips. Made the boxes and stacked them for how the final thing will look.
The Labyrinth
![06.jpg](/proxy/?url=https://content.instructables.com/FO7/4B2J/K8CFZMUQ/FO74B2JK8CFZMUQ.jpg&filename=06.jpg)
![07.jpg](/proxy/?url=https://content.instructables.com/FWV/FF8Y/K8CFZMUR/FWVFF8YK8CFZMUR.jpg&filename=07.jpg)
![08.jpg](/proxy/?url=https://content.instructables.com/FQ4/62CN/K8CFZMUU/FQ462CNK8CFZMUU.jpg&filename=08.jpg)
![09.jpg](/proxy/?url=https://content.instructables.com/FSS/3G3Z/K8CFZMUX/FSS3G3ZK8CFZMUX.jpg&filename=09.jpg)
Started making the labyrinth with the 2cm strips. Tried to replicate the drawing to the exact millimeter.
Checking If Everything Works
![10.jpg](/proxy/?url=https://content.instructables.com/FKT/EG39/K8CFZMV7/FKTEG39K8CFZMV7.jpg&filename=10.jpg)
![Puzzle box part 1](/proxy/?url=https://content.instructables.com/FU1/40BY/K8CFZN3E/FU140BYK8CFZN3E.jpg&filename=Puzzle box part 1)
Checked all the layers stage by stage before sticking up so that nothing fails. Used a bead from wife's jewelry box to test this.
All Done
![11.jpg](/proxy/?url=https://content.instructables.com/FMG/0Y91/K8CFZMV8/FMG0Y91K8CFZMV8.jpg&filename=11.jpg)
![Puzzle box 2](/proxy/?url=https://content.instructables.com/FEA/Q9VI/K8CFZN3Z/FEAQ9VIK8CFZN3Z.jpg&filename=Puzzle box 2)
Done with the labyrinth. Now play along. Don't forget to keep the plan safe for future use.