Pallet Bar With Ice Bath

Kinda straight forward. I made this for my wedding. We had a pre- wedding party and it was a HIT! Kept the drinks cold and also housed the drink section. We had some other mixers up on the bar as well not pictured.

I cut two pallets in half, turned them upright and mounted them to two upright sections one was a whole section, one was a half section to give me the full length of the top pallet. I did cover some of the gaps to make it look more full on the front view.

I took a full pallet and cut the width down to make it only 30 inches deep or so. I then cut out one whole section out on the left for ice. I took those cut pieces and filled all gaps on the right side so it acted as a table top. Once this was done I covered all gaps under the ice section and lined it with a plastic bag using silicone and staples along the top portion. make sure to leave enough room for the weight of ice.

If you only use this for your party and you're done with it you can always convert it like I did. I created a spice garden out of it which was easy to convert.