Painting and Rebuilding a Ps4 Controller

this is an easy guide to paint your own ps4 controller

Small Philips Screwdriver

Needle-nose pliers/tweezers Fine grit sand paper (400 grit) blue painters tape Spray paint (colors/brand of your choice) Clear spray paint (I use Rustoleum clear lacquer)

1. Remove 4 screws from back of controller

2. Pull out ribbon connecting the light bar to the main board (with needle-nose pliers)

3. Remove screw under battery

4. Pull out ribbon connecting touch-pad with the main board (with needle-nose pliers)

5 . Remove all buttons

6. Remove plastic pieces making up the light bar

7. Remove two screws holding in USB port board.

take the shell of the controller and paint the shell a bass controller designs are your own but i like the splatter effect

now rebild your controller just as disasible if you need help heres a youtube link https://www.youtube.com/watch?v=JVKnlSDQ_Ng&feature=emb_logo