Paintball Barrel Cover

This is a cover for your paintball gun so you don't shoot any one off the field. This is NOT a substitute for a properly manufactured safety device, it is merely a how -it-is-made instructables. I take no responsibility for any injury or death caused by this instructable. Use at own risk Inspired by Paintball Borg (Pretty much the same idea but my version )

You will need a
-Knife
-tape measure
-old jeans
-bungie cord and plastic thingy
-marker
-paint (colour is up to you)
-pen
-printer paper
-ruler
-glue ( I used "NO more Nails") but any strong glue will do

Mark at the 2,4,6,8 inch lines on a standard printer paper

Trace onto jeans and cut out

glue on 2x4 sheet onto bigger piece, this will add support where the ball breaks

Practice folding the paper to see how to fold the jeans, one end should be open and the other closed.

Glue it together, i recommend putting that template inside the jeans so it doesn't glue together

Apply paint

All finished, you can now put lettering on it like: Get some, eat paint, or what ever you want.