Description
I made PZ-12 with the idea of a personal assistant droid or server droid in mind. I made him small and nimble but made sure to have arms available to perform a variety of tasks. My droid rolls around at roughly 1 ft tall and was designed with 3d printing in mind for all clearances and choice of component splitting. A full sized PZ-12 would roll around at about 2.5 to 3 ft tall, this mechanical model is simply scaled down to accommodate 3d printing and ease of part placement. This droid should be able to be printed with minimal to no supports and aligned using the pins provided in the file. An excess of pins was provided to print to find the ones that fit best post printing. This particular version of PZ-12 sports a rebel logo on the wheel and would most likely be used to help transport information and serve the rebel alliance at their respective bases. The colors for PZ-12 were inspired from some of my favorite Star wars droids, R2D2 and D-o mostly with the blue and green accents. The yellow accents complimented well and gave him a more friendly look as a helper droid. PZ-12 would have a friendly voice and a deep knowledge and understanding of humanoid tendencies as well as having compassion for the rebels. This would be deeply routed in the droids programming and would rarely, if ever, be able to change for purpose of the empire.