PVC Pipe Shelf
![15, 6:31 PM.jpg](/proxy/?url=https://content.instructables.com/F0H/9V9Q/IG3WVCPO/F0H9V9QIG3WVCPO.jpg&filename=15, 6:31 PM.jpg)
PVC pipe is a great building material. It is cheap and has many uses, like making a supercool shelf.
Materials
![15, 6:35 PM.jpg](/proxy/?url=https://content.instructables.com/FID/IMQH/IG3WVDBL/FIDIMQHIG3WVDBL.jpg&filename=15, 6:35 PM.jpg)
Materials
1. 10 feet of 2" diameter PVC pipe
2. 2 L shaped 2" PVC pipe connector joints
3. Six bolts (size doesn't matter a ton)
4. Six nuts
Tools
1. Drill and drill bits
2. Hack saw
3. Marker (not necessary but helps)
4. Measuring device
WARNING: be very careful with tools as they can hurt you, make sure you have adult supervision at all times.
1. 10 feet of 2" diameter PVC pipe
2. 2 L shaped 2" PVC pipe connector joints
3. Six bolts (size doesn't matter a ton)
4. Six nuts
Tools
1. Drill and drill bits
2. Hack saw
3. Marker (not necessary but helps)
4. Measuring device
WARNING: be very careful with tools as they can hurt you, make sure you have adult supervision at all times.
Cut the Pipe
![15, 6:35 PM.jpg](/proxy/?url=https://content.instructables.com/F3X/ELFO/IG3WVDAF/F3XELFOIG3WVDAF.jpg&filename=15, 6:35 PM.jpg)
![15, 6:31 PM.jpg](/proxy/?url=https://content.instructables.com/F2N/J7S6/IG3WVD6O/F2NJ7S6IG3WVD6O.jpg&filename=15, 6:31 PM.jpg)
The first piece to cut is the main part of the shelf where you set objects on. Cut 3 2 for pieces. The second part are the parts that connect the shelf to the wall. You will need 2 7 inch pieces and 2 6 inch pieces
Line Up the Main Piece
![15, 6:35 PM.jpg](/proxy/?url=https://content.instructables.com/F1J/NFR6/IG3WVD9Y/F1JNFR6IG3WVD9Y.jpg&filename=15, 6:35 PM.jpg)
Line up the three 2 foot parts along the two 7 inch pieces. Make a dot with the marker in each point of contact.
Drill and Bolt Together
![20151023_212345229_iOS.jpg](/proxy/?url=https://content.instructables.com/F0X/0DZ7/IG3WVLA5/F0X0DZ7IG3WVLA5.jpg&filename=20151023_212345229_iOS.jpg)
Drill a hole on each of the dots and feed a bolt through on each spot.
Add the Part to Hang It
![20151024_002301449_iOS.jpg](/proxy/?url=https://content.instructables.com/FR8/RE4L/IG3WVLNX/FR8RE4LIG3WVLNX.jpg&filename=20151024_002301449_iOS.jpg)
Attach one end of the PVC pipe connector to the shelf and to one of the 6 inch pieces of PVC pipe, do this on both sides.
Your Done!
![20151023_233402052_iOS.jpg](/proxy/?url=https://content.instructables.com/F7R/X32R/IG3WVLV8/F7RX32RIG3WVLV8.jpg&filename=20151023_233402052_iOS.jpg)
![20151024_002327247_iOS.jpg](/proxy/?url=https://content.instructables.com/FRS/UURQ/IG3WVLRX/FRSUURQIG3WVLRX.jpg&filename=20151024_002327247_iOS.jpg)
Thank you for my instructable and please vote for me!
*note: to hang just screw it into the wall, I have not found a place to put it yet so I don't have pictures yet.
*note: to hang just screw it into the wall, I have not found a place to put it yet so I don't have pictures yet.