PVC Puppet Stand

This is a basic idea for a PVC Puppet Stand, utilizing the PVC fig rig instructable.
it is rather inexpensive to make and can be used for almost any size puppet

Gather Your Supplies

The stand calls for 3/4 inch PVC; not CPVC. Because if you try to mix and match, it won't fit.
This is the breakdown:

4 - 6" long PVC
4 - 2 1/2" long
2 - 3" long
2 - 1 1/2" long

7 - 45 degree couplers
3 - T couplers
3 - straight couplers

Put It All Together

This is the easy part... look at the pictures... if you can't see them, i can't really explain the process without them.

You Should Be Finished

with the completed stand, you can put big, or little puppets on the stand for pictures, or on shelves... paint the stand with plastic paint, but be sure not to get some of the ends painted together. if it is to be adjustable, it doesn't help if it is (glued) together with paint.
Also with this, if you keep the base together; take apart some of the pieces to reconfigure it to your liking...
Hope this helps,
enjoy