PVC Pipe Clarinet

by h23aigray in Living > Music

1673 Views, 4 Favorites, 0 Comments

PVC Pipe Clarinet

Photo on 11-10-16 at 10.44 AM.png
  1. I hope you have fun making this instrument and if you have any questions just comment below and I will answer back as soon as I can. Also, check out the material list down below for lots of information.

Materials

PVC Pipe length of your forearm 3.3 centimeter diameter

Mouthpiece

Duct Tape

Drill and drill bit

Hand Saw

Sandpaper (optional)`

Photo on 11-15-16 at 8.07 AM.png

Find It

Find a mouthpiece that fits your pipe.

Draw It

Screen Shot 2016-12-07 at 6.08.21 AM.png

Use this chart to locate where to put dots on your pipe.

Drill It

Photo on 11-8-16 at 11.38 AM.jpg

Now it is time to use the drill to drill holes wherever you put the dots.

Tape It

Photo on 11-10-16 at 9.35 AM.jpg

Now it is time to tape on your mouthpiece.

Sand It

Photo on 11-15-16 at 9.10 AM.jpg

Now this is an optional step but if you want to make it softer and easier to grip on to just use some sandpaper to sand it a little bit.

Enjoy It!

Screen Shot 2016-12-07 at 6.11.19 AM.png

Congratulations you have just completed your very own PVC Pipe Clarinet!