PETG Face Shield- 5min Construction Time
by Zöhrer in Craft > Costumes & Cosplay
405 Views, 0 Favorites, 0 Comments
PETG Face Shield- 5min Construction Time
![Post_faceshield2_01.png](/proxy/?url=https://content.instructables.com/F0Q/P0KX/K9K8NPGN/F0QP0KXK9K8NPGN.png&filename=Post_faceshield2_01.png)
This project was developed to deal with the emergency situation caused by the Covid-19 pandemic.
Easy-access materials were adopted, PETG or acetate sheets, bottle cap and bicycle tubes that could be found quickly for making a facial protector against micro and macro drops containing a large viral load. This Face Shield was not designed for situations other than those listed above.
5min construction time
Materials
![Post_faceshield2_02.png](/proxy/?url=https://content.instructables.com/F46/CJNX/K9K8NPHQ/F46CJNXK9K8NPHQ.png&filename=Post_faceshield2_02.png)
Tools
![Post_faceshield2_03.png](/proxy/?url=https://content.instructables.com/FO9/2OZ8/K9K8NPL3/FO92OZ8K9K8NPL3.png&filename=Post_faceshield2_03.png)
Step 1 - Visor
![Post_faceshield2_04.png](/proxy/?url=https://content.instructables.com/FD8/K7A1/K9K8NPQS/FD8K7A1K9K8NPQS.png&filename=Post_faceshield2_04.png)
Step 2 - Forehead
![Post_faceshield2_05.png](/proxy/?url=https://content.instructables.com/FXP/S2LY/K9K8NPV0/FXPS2LYK9K8NPV0.png&filename=Post_faceshield2_05.png)
Step 3 - Rubber Strips
![Post_faceshield2_06.png](/proxy/?url=https://content.instructables.com/F0C/6H37/K9K8NPW8/F0C6H37K9K8NPW8.png&filename=Post_faceshield2_06.png)
Step 4 - Assembly
![Post_faceshield2_07.png](/proxy/?url=https://content.instructables.com/FMA/YNEB/K9K8NPX1/FMAYNEBK9K8NPX1.png&filename=Post_faceshield2_07.png)
Step 5 - Welding
![Post_faceshield2_08.png](/proxy/?url=https://content.instructables.com/FQ6/3P9X/K9K8NTNR/FQ63P9XK9K8NTNR.png&filename=Post_faceshield2_08.png)
Step 6 - Use and Adjustments
![Post_faceshield2_09.png](/proxy/?url=https://content.instructables.com/FPB/QQJI/K9K8NTRJ/FPBQQJIK9K8NTRJ.png&filename=Post_faceshield2_09.png)
Step 7 - Hygiene and Asepsis
![Post_faceshield2_10.png](/proxy/?url=https://content.instructables.com/FT5/JOSB/K9K8NTSH/FT5JOSBK9K8NTSH.png&filename=Post_faceshield2_10.png)