PET Bottle to Jewelry Box

by patchi in Workshop > Organizing

2088 Views, 10 Favorites, 0 Comments

PET Bottle to Jewelry Box

IMG_1738.JPG

Create your own small jewelry box from a recycled soda bottle!

IMG_1728.JPG

Rinse and dry PET bottle

IMG_1729.JPG

Mark a line about __ inches from the bottom, or just where the bottle's curvature begins to change. Using the utility knife, carefully cut a line around the circumference of the bottle.

IMG_1740.JPG

Your soda bottle should have five bumps on the bottle, to maximize its stability when standing. Make a mark in between each of these bumps, indicating where your vertical cuts will be made. Using scissors, make vertical cuts down toward the base of the bottle, stopping approximately __inches from the bottom.

*Make sure your cuts are all of equal length!

Trim

IMG_1742.JPG

Round off the hard edges at the top of your container, to protects the users' fingers when opening and closing it.

Fold

IMG_1739.JPG

Fold over the flaps and add a bead or other indicator that your box is now closed! ...And voilá!