PCBWay Arduino Cookie Christmas

by silicioslab in Circuits > Arduino

10 Views, 0 Favorites, 0 Comments

PCBWay Arduino Cookie Christmas

1.jpg

In this project, you'll learn how to program the PCBWay Cookie Christmas Module for Arduino. Through this kit you'll learn how to create your first code lines with Arduino.

It is a simple kit that can be used to teach logical programming in the classroom.

To construct this project you'll need:

Supplies

The Project

2.jpg

Now, you need understand how works the electronic schematic of the cookie module. In the Figure 1, we shown the circuit.

After constructing the electronic schematic, you'll create your own format through contour in the BoardOutline Layer.

The Printed Circuit Board

3.jpg
4.jpg

After this, we'll have the following result, which is presented in the Printed Circuit Board in the figure above.

After present the electronic schematic in PCB, we'll show the result of the Cookie PCB Prototype in the figure above.

.

Thus, through this kit, you'll create several Arduino Projects using LED's for children.

And to finish, you can use the code to playing with the Module with Arduino.

void setup()
{ // put your setup code here, to run once: //Config the pin 2 until pin 9 as OUTPUT for(byte pin = 2; pin < 7; pin++) { pinMode(pin, OUTPUT); } }

void loop() { // put your main code here, to run repeatedly: digitalWrite(2, HIGH); //Signal light ON left delay(1000); digitalWrite(2, LOW); //Signal light OFF left digitalWrite(3, HIGH); //Signal light ON right delay(1000); digitalWrite(3, LOW); //Signal light OFF right

digitalWrite(4, HIGH); //Turn ON Left Headlight LED digitalWrite(5, HIGH); //Turn ON Right Headlight LED

delay(1500);

digitalWrite(4, LOW); //Signal light OFF right digitalWrite(5, LOW); //Signal light OFF right

Therefore, from the code, it will possibly control and fun with the cookie module for Arduino.

Conclusion

Through this project, you'll learn basic electronics, blink, and basics of the electronic schematic. In addition, you'll use the Arduino to program the kit and learn about logical programming.

Now, if you have interesting in obtaining this board, you can access the website and obtain your own PCB's.

Acknowledgment

Thanks to the PCBWay for supporting the our YouTube Channel and produce and assembly PCBs with better quality.

The SilĂ­cios Lab thanks UTSOURCE to offer the electronic components.